ATORN SC end mill D 16.0 x 32 x 46 x 90mm, HB shaft 4 cutting edges, ULTRA MS
Brand: ATORN
Surface: ULTRA MS
Length: 90 mm
Art.-no. 16670204
Manufacturer article no. 11861026
EAN 4050293359503
Application
End mill for machining stainless steel, titanium alloy, nickel and copper alloys.
Execution
- ultra-fine grain cemented carbide
- HB straight shank
- with clearance
- high-performance ULTRA MS layer
- defined cutting edge rounding
- centre cutting
Advantage
- optimised, positive cutting geometry
- optimum chip removal and temperature resistance
- maximum service life thanks to ULTRA MS coating
Brand | ATORN |
EAN | 4050293359503 |
Manufacturer Part Number | 11861026 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 40° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 16 mm |
Cutting edge length | 32 mm |
Clearance length | 46 mm |
Length | 90 mm |
Clearance diameter | 15 mm |
Shank diameter | 16 mm |
fz stainless steel | 0.065 mm |
Product Group | 1HJ |
Gross Weight | 0.230 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.08 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.08 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.08 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.08 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.08 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.07 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.095 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.07 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.095 | ⚫ |
Last viewed
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 5.4 mm straight shank HA
ATORN screw tap HSSE V3 vap. C 45° M22 2.5 ISO2 D<2.5xD CNC;des. UNI
ATORN twist drill N HSS, steam-treated, DIN 1897, 6.8 mm x 74 mm x 34 mm, 118°
ANKE combination workbench 723 V uni coating panel 2000x700x850 mm
ANKE workbench model 205 V, 1500 x 700 x 850 mm, solid beech panel, colour opt.
ATORN ribbed rubber mat, oil-resistant 527 x 348 x 3 mm
ATORN solid carbide drill UNI TiAlNplus 5xD with IC 11.1 mm straight shank HA
ORION high-perf. drill, SC TiAlN, HPC 3xD 5.5 mm x 6 mm x 66 mm HB external
ORION indexable insert, negative, SNMM 190624 RP1 OHC7625
Factory calibration for limited shaft slot gauge 1–10 mm