ORION solid carbide chamfer cutter, 120 degrees, dia = 6.0 mm shaft DIN6535 HA
Brand: ORION
Surface: Uncoated
Length: 60 mm
Art.-no. 16706260
Manufacturer article no. 16706260
EAN 4039247573868
Application
For cutting chamfers and countersinking on machining centres and CNC machines.
Execution
- solid carbide ultra-fine grain
- straight shank in accordance with DIN 1636 HA
- 120°
- uncoated
Notes
chamfer point flattened 10% of diameter, e.g. dia. 10 = 1 mm
Brand | ORION |
EAN | 4039247573868 |
Manufacturer Part Number | 16706260 |
Cutting edge diameter | 6 mm |
Chamfer angle | 120 Degree |
Type | N |
Number of cutting edges (Z) | 2 PCS |
Surface | Uncoated |
Shank diameter | 8 mm |
Tool holding device | HA parallel shank |
Cutting edge length (S) | 12 mm |
Length | 60 mm |
Product Group | 150 |
Gross Weight | 0.040 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 70-75 | 0.03-0.07 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 70-75 | 0.03-0.07 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 65-70 | 0.03-0.07 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 60-65 | 0.03-0.07 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 30-40 | 0.03-0.07 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 30-40 | 0.03-0.07 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 30-35 | 0.03-0.07 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 30-35 | 0.03-0.07 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 30-35 | 0.03-0.07 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 30-35 | 0.03-0.07 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 30-35 | 0.03-0.07 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 350-500 | 0.03-0.07 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 280-450 | 0.03-0.07 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 40-80 | 0.03-0.07 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 40-80 | 0.03-0.07 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 60-120 | 0.03-0.07 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 120-150 | 0.03-0.07 | ⚫ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 50-100 | 0.03-0.07 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 120-150 | 0.03-0.07 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 60-80 | 0.03-0.07 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 35-40 | 0.03-0.07 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 35-40 | 0.03-0.07 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 35-40 | 0.03-0.07 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 20-25 | 0.02-0.04 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 15-20 | 0.02-0.04 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 15-20 | 0.02-0.04 | ⚪ |
Last viewed
ATORN twist drill TLP HSSE, DIN 1897, 4.1 mm x 55 mm x 22 mm, 130°
ATORN high-perf. pilot drill, SC TiAlN, 5xD 2.02 mm x 4 mm x 57 mm HA internal
Rubber flex collet chuck J 117, clamping range 4.5 - 6.5 mm
HK tool cabinet system 550S, model 32/9 with SCA
ATORN twist drill TLP HSSE, DIN 340, 6.6 mm x 148 mm x 97 mm, 130°
ATORN hydraulic expansion chuck SK50 18 x 80.5 mm
ANKE workbench 55 V solid beech, load cap. 1500 kg, 800x700x850 mm, RAL 7035
META double plug-in rack CLIP 150 galv. comp. add-on sh. 3000x1000x500mm 2x7 sh.
ATORN screw tap HSSE vap. C 376 40° M16 2mm ISO2 S≤2.5xD CNC des. P
ATORN twist drill N HSS, steam-treated, DIN 1897, 3.3 mm x 49 mm x 18 mm, 118°